STRUCTURAL FIRE FIGHTING GLOVES

1 in stock

Hand Protection/Gloves

Structural Fire Fighting Gloves in fire and water resistant treated goatskin grain leather on the palm of the gloves and Nomex Delta TA woven material on the back of the glove. Shock-resistant metacarpal reinforcement on fingers. Porelle FR waterproof, breathable glove inserts. Knitted Kevlar cuffs with an artery protection layer. Leather extendable inserts at back of hand and knuckles. The glove pattern is ergonomically designed with leather for maximum protection, dexterity and comfort. Nomex thread throughout.With a 2 year warranty for material and workmanship.

Material: The outer palm of the glove is made from treated FR and water resistant goatskin grain leather.

The outer back of the glove is constructed with Nomex Delta TA.

Lined with a Porelle waterproof breathable inserts

The inner layer is aramid knitted materail.

With knitted 75mm Kevlar cuffs, with a leather artery protector applied.

Colour: Dark Navy with Black trims

Size: Sizes 6,7,8,9,10,11,12

Standards:
EN 13688:2013 General requirements for protective clothing
EN 659:2003+A1:2008 Structural Fire Fighting Gloves.
EN 388:2016 Safety gloves that are provided to protect against mechanical risks (A3, C4, D3, EE)
EN 407:2004 Protective gloves against thermal risks (Heat and/or fire) (A4, B2, C3, D3)

Supporting Documents

1 in stock

Hand Protection/Gloves

What Is An Arc Flash?

An arc flash is a sudden release of electrical energy that occurs when current jumps across a gap between two conductors or from a conductor to a ground. The arc flash generates an intense burst of heat and light that can cause serious injuries, damage to equipment, and fires.

Arc flashes can occur in a wide range of electrical systems and equipment, including switchgear, transformers, motors, and other high-voltage components. They can be caused by a variety of factors, including equipment failure, human error, or a short circuit.

The intense heat generated by an arc flash can cause severe burns, as well as ignite clothing and other materials in the surrounding area, leading to secondary fires. The bright light from the arc flash can also cause temporary or permanent vision damage.

To prevent arc flash incidents, it’s important to follow proper electrical safety procedures, including wearing appropriate personal protective equipment (PPE), de-energizing equipment before working on it, and maintaining a safe distance from energized equipment.

Understanding Arc Ratings and Calories

Now that you understand FR clothing is tested and given an arc rating, you know that the arc rating measures the amount of heat the flame resistant fabric blocks when exposed to electric arc. The arc rating is the number of calories that the garment is expected to “absorb” if exposed to an electric arc. Arc rating is, in essence, the level of protection provided to you, the wearer.

Calorie is the unit of measure of the heat energy of an arc flash and the protective level of FR clothing. The bigger the calorie number, the greater the heat energy level of arc flash and the greater the protective level of the clothing. You will be protected from an electric arc if your clothing has a higher calorie arc rating than the calories of heat generated by the arc.

While it does not matter if the fabric has an Ebt,  ATPV and or ELIM value, it is important to pay attention to the calorie level the fabric can support* (as expressed in cal/cm2)