Have an enquiry? Get In Touch




A lightweight design providing very high level of thermal protection, durability and comfort. Ergonomically designed for maximum comfort and mobility. Dissected heat applied Triple Trim Reflex throughout. Wicking strips throughout. Badges, pockets, torch loops and reflex can be modified to individual Fire Service requirements.  The Jacket is a Hip length design, with quick release safety zip, 2 front lower pockets with flaps, 1 sleeve pocket and flap, Radio pocket, and Torch loops. Patented closed cell foam for additional comfort at shoulders and lower back. The Salopetteshave a front opening zip, with butterfly strap design, 2 deep side leg pockets and flaps. Patented Arashield and closed cell foam for additional comfort and protection at knees. With a 2-year warranty for material and workmanship.


Outer – 225 gsm Patented Twin System with Kelar grid to the rear, 80% Kermel, 18% Kevlar, 2% Anti-static Fibre. With XPS Petroshield FC treatment for water resistance and chemical run of.

Moisture Barrier – Stedair PTFE with blood borne pathogen protection.

Thermal Barrier – Patented 220gsm Twin Spacer, 50% Nomex, 50% Viscose.

Colour: Navy as standard, also available in gold and red

Size: XS to 3XL, in Reg and Tall.

EN 469:2020 (Class 2) – Structural Fire Fighting Suit X2, Y2, Z2
EN 13688:2013 – General requirements for Protective Clothing

Supporting Documents

1 in stock

What Is An Arc Flash?

An arc flash is a sudden release of electrical energy that occurs when current jumps across a gap between two conductors or from a conductor to a ground. The arc flash generates an intense burst of heat and light that can cause serious injuries, damage to equipment, and fires.

Arc flashes can occur in a wide range of electrical systems and equipment, including switchgear, transformers, motors, and other high-voltage components. They can be caused by a variety of factors, including equipment failure, human error, or a short circuit.

The intense heat generated by an arc flash can cause severe burns, as well as ignite clothing and other materials in the surrounding area, leading to secondary fires. The bright light from the arc flash can also cause temporary or permanent vision damage.

To prevent arc flash incidents, it’s important to follow proper electrical safety procedures, including wearing appropriate personal protective equipment (PPE), de-energizing equipment before working on it, and maintaining a safe distance from energized equipment.

Understanding Arc Ratings and Calories

Now that you understand FR clothing is tested and given an arc rating, you know that the arc rating measures the amount of heat the flame resistant fabric blocks when exposed to electric arc. The arc rating is the number of calories that the garment is expected to “absorb” if exposed to an electric arc. Arc rating is, in essence, the level of protection provided to you, the wearer.

Calorie is the unit of measure of the heat energy of an arc flash and the protective level of FR clothing. The bigger the calorie number, the greater the heat energy level of arc flash and the greater the protective level of the clothing. You will be protected from an electric arc if your clothing has a higher calorie arc rating than the calories of heat generated by the arc.

While it does not matter if the fabric has an Ebt,  ATPV and or ELIM value, it is important to pay attention to the calorie level the fabric can support* (as expressed in cal/cm2)